Products

Mr. Nano Repel

Mr. Nano Repel waterproofing involves tiny particles creating a protective layer. These particles are so small, that they’re invisible to the naked eye. Yet, they form a robust barrier against water.

Mr. Nano Repel Booster

Mr. Nano Repel offers top-quality waterproofing for all sectors, using advanced techniques for durability and personalization. And the booster simply enhances the Nano Repel for everlasting stability

TECHNICAL DATA SHEET

Features:

  • Self Breathing: Allows building surfaces to breath naturally
  • Good resistance of UV rays which Cause fading.
  • Low permeability
  • Efflorescence: Prevents Efflorescence
  • Penetration: Due to low viscosity of the diluted solution, penetration
  • Barrier to salt and Fungus Attack:
  • Createsa layered barrier against Water & Salt

Surface Preparation:

Cleaning the surface by chipping and removing loose cement mortar by grinding, remove dust by air blower/ Industrial vacuum Cleaner followed by high pressure water jet cleaning, allow the surface to dry, clean the surface again with the Vacuum Cleaner

Solution Preparation:

Slowly mix 1 Ltr (Part A) Mr.Nano Repel in 18 liters potable RO water.
Add 1 Ltr ( Part B) Mr.Nano Repel Booster to this solution (Mr.Nano Repel:
Mr.Nano Repel Booster : Water Ratio should be.

Applying Procedures:

Using Spraying/Flooding/Injection/Brush
or Roller to apply the solution for Seepage Prooing.

Area of Application

Water repellent treatment for
  • Concrete Surfaces/Basement
  • Masonry Surfaces
  • Natural & Artificial stones
  • Cranites
  • Clay brick Surfaces
  • Slab/Terrace/balconies
  • Bathroom/Toilet
  • Vertical walls/Retaining walls/ Exposed Brick walls

Coverage:

3.5 to 4.5 Sq.mtr/litre. 35 to 45 Sq.ft/litre.
Actual coverage may vary as it depends upon permeability
and absorption characteristics of the substrate.

Preserving Conditions:

Store in a cool and dry place between 5C to 45C, away from sunlight, Heat, source of spark, rain and standing water. Close the container tightly after every withdrawal as the product can start reacting with moister in the ambient air.